Commercial Procurement · Cross-Border Sourcing · Enterprise Distribution procurement@millholt.com 中文

Private commercial trade enterprise

Commercial procurement and cross‑border sourcing for North America

Sourcing, product verification and channel fulfilment for industrial and commercial buyers, working directly with manufacturers across Asia, Europe and the Americas.

Origin markets
Asia · Europe · Americas
Destination
United States & Canada
Trade terms
FOB · EXW · CIF · DDP
Documentation
SDS · COA · TDS · Test reports

About the firm

A private commercial trade and procurement enterprise

Millholt Commercial Group works directly with manufacturers, original design manufacturers (ODMs) and industrial formulators across Asia, Europe and the Americas.

Our job is to qualify high-specification materials and products, keep each supply program on the right side of regional regulation, and manage domestic fulfilment for our commercial partners.

  • 01

    Specification first

    Every program starts from a written specification and a defined target market, not from a catalogue.

  • 02

    Documented compliance

    Product moves only with the documentation the destination market requires, checked before the first order.

  • 03

    Long-term supply

    We look for producers who want repeat programs and steady volumes, not one-off orders.

Operating divisions

Four divisions, one procurement office

01

Advanced Materials & Specialty Consumables

Procurement and technical evaluation of high-performance surface treatments, industrial resins, technical coatings and chemical auxiliaries.

  • Epoxy & polyurethane resins
  • Floor & concrete coatings
  • Sealants & adhesives
  • Cleaning concentrates
  • Industrial lubricants
02

Commercial Hardware & Equipment

Direct factory sourcing of specialised maintenance equipment, tooling, precision parts and commercial facility supplies.

  • Hand & power tools
  • Fasteners & fittings
  • Maintenance equipment
  • Machined components
  • Facility & janitorial supplies
03

OEM & Private-Label Product Development

Working with certified manufacturing facilities to benchmark formulations, adapt packaging and meet regional regulatory requirements.

  • Formulation benchmarking
  • Packaging adaptation
  • Bilingual label artwork
  • Retail-ready packing
04

Supply Chain Logistics & Verification

End-to-end coordination of import compliance, customs documentation, quality-control audits and regional stock distribution.

  • Pre-shipment inspection
  • HTS classification
  • Customs documentation
  • Freight coordination

Global sourcing

Origin markets on three continents. One destination market.

We source from producers in Asia, Europe and the Americas for supply into the United States and Canada. Every supplier goes through the same documentation review before a program starts.

Sourcing lanes into North America World map showing supply lanes from East Asia, Southeast Asia, South Asia, Europe and Mexico into Los Angeles, Vancouver, Houston and New York. Shanghai to Los Angeles / Long Beach Shenzhen to Los Angeles / Long Beach Ho Chi Minh City to Los Angeles / Long Beach Busan to Vancouver Mumbai to New York / New Jersey Rotterdam to New York / New Jersey Hamburg to Houston Monterrey to Houston Shanghai Shenzhen Busan Ho Chi Minh City Mumbai Rotterdam Hamburg Monterrey Los Angeles / Long BeachLos Angeles VancouverVancouver HoustonHouston New York / New JerseyNew York EAST ASIA SOUTHEAST ASIA SOUTH ASIA EUROPE MEXICO NORTH AMERICA
Origin ports North American gateways Supply lanes

East Asia

China · Taiwan · South Korea · Japan

Electrical components, hardware and tooling, resins and chemical intermediates, packaging.

Ocean transitAbout 14–20 days to the US West Coast

Southeast Asia

Vietnam · Thailand · Malaysia · Indonesia

Finished consumer goods, wood products, rubber and polymer goods, textiles.

Ocean transitAbout 18–25 days to the US West Coast

South Asia

India · Bangladesh · Sri Lanka

Specialty and fine chemicals, dyes and pigments, textiles, castings and forgings.

Ocean transitAbout 25–40 days to the US East Coast, depending on routing

Europe

Germany · Netherlands · Italy · Poland

Specialty coatings and additives, precision tooling, industrial equipment, premium private label.

Ocean transitAbout 8–14 days across the Atlantic

The Americas

Mexico · Canada · Brazil

Assemblies and finished goods qualifying under USMCA, metal fabrication, plastics.

OverlandAbout 1–5 days to US distribution points

Transit times are typical port-to-port figures and vary by carrier, routing and season.

Supplier onboarding

From first contact to an approved supply program

  1. 01

    Introduction

    Send your company profile, product details and documents through the supplier portal, or write to the trade desk.

  2. 02

    Documentation review

    We check spec sheets, safety data, certifications and regulatory status against the destination market.

  3. 03

    Sample evaluation

    Samples or evaluation kits are tested against the specification and benchmarked against products already on the market.

  4. 04

    Commercial terms

    We agree pricing, MOQ, lead times, Incoterms, payment terms, and packaging and labelling requirements, under NDA where needed.

  5. 05

    Pre-shipment inspection

    First orders are inspected before they ship, using AQL sampling to ISO 2859-1, by our team or an independent inspection agency.

  6. 06

    Ongoing program

    Approved suppliers receive forecasts, repeat orders and periodic quality reviews.

Compliance reference

What North American market entry requires

The usual regulatory requirements for each product class, so you can prepare documentation before we start a review.

Chemicals, resins & coatings

United States

  • TSCA. Every component listed as active on the TSCA Inventory, or exempt. The importer certifies TSCA compliance at entry.
  • Hazard communication. A 16-section Safety Data Sheet and labels in OSHA HazCom (GHS) format, in English.
  • Transport. Hazmat classification under DOT 49 CFR, and IMDG for ocean freight.
  • VOC limits. EPA national rules, plus stricter CARB and South Coast AQMD limits for products sold in California.
  • Proposition 65. Assessment of listed substances and any California warning label.

Canada

  • CEPA. Substances on the Domestic Substances List (DSL), or notified as new substances.
  • WHMIS 2015. SDS and supplier labels in both English and French.
  • TDG. Classification under the Transportation of Dangerous Goods Regulations.
  • VOC limits. Federal VOC concentration limits for architectural coatings.
Documents we'll ask for
  • SDS
  • Certificate of Analysis
  • Technical data sheet
  • TSCA statement
  • Full composition (under NDA)

Hardware, tools & electrical

United States

  • Electrical safety. Listing by an OSHA-recognized testing laboratory (UL, Intertek ETL, CSA) for mains-powered products.
  • FCC Part 15. Equipment authorization for electronic devices, by Supplier's Declaration of Conformity or certification.
  • Batteries. UN 38.3 test summary for lithium cells and packs, and correct shipping classification.
  • Energy. DOE efficiency standards and FTC EnergyGuide labels where the product is covered.
  • Origin marking. Country of origin marked on the product or its container (19 CFR 134).

Canada

  • Electrical safety. Certification by an SCC-accredited body (CSA, cUL, cETL).
  • ISED. ICES-003 for digital devices, and RSS standards with certification for radio equipment.
  • Energy. NRCan Energy Efficiency Regulations where the product is covered.
  • Labelling. English and French on consumer-facing packaging.
Documents we'll ask for
  • Test reports
  • Safety certificates
  • FCC SDoC or grant
  • UN 38.3 summary
  • RoHS declaration
  • Drawings & spec sheets

Finished goods & private label

United States

  • CPSC. A General Certificate of Conformity for regulated products. Children's products need third-party testing, a Children's Product Certificate and tracking labels (CPSIA).
  • FTC labeling. Textile fiber content and care labels, and strict rules for any "Made in USA" claim.
  • FDA. Food-contact materials (21 CFR 174–186), and cosmetics facility registration and product listing (MoCRA).
  • State rules. Proposition 65, and state restrictions such as PFAS bans in certain product categories.
  • Retail readiness. GS1 barcodes, carton marks and compliance with retailer routing guides.

Canada

  • CCPSA. The Canada Consumer Product Safety Act and its product-specific regulations.
  • Packaging and labelling. Bilingual labels and metric net quantity under the Consumer Packaging and Labelling Act.
  • Textiles. Fibre content and dealer identity (CA number) under the Textile Labelling Act.
  • Cosmetics. Notification to Health Canada within 10 days of first sale.
Documents we'll ask for
  • Accredited lab test reports
  • CPC or GCC
  • Packaging specifications
  • Artwork files
  • Factory audit report

Import & logistics (all products)

United States

  • Classification and duty. HTS classification, including Section 301, Section 232 and other additional tariffs.
  • ISF (10+2). Importer Security Filing at least 24 hours before ocean cargo is loaded abroad.
  • UFLPA. Supply-chain traceability for inputs, especially cotton, polysilicon, aluminum and PVC.
  • USMCA. Certification of origin to claim duty-free treatment for qualifying goods from Mexico and Canada.
  • Wood packaging. ISPM 15 heat-treated, stamped pallets and crates.

Canada

  • CARM. Registration in the CBSA Assessment and Revenue Management portal before importing.
  • CUSMA. Certification of origin for duty-free North American treatment.
  • Tariff classification. Customs Tariff classification and any surtaxes that apply.
  • Wood packaging. ISPM 15 applies, as in the US.
Documents we'll ask for
  • Commercial invoice
  • Packing list
  • Bill of lading
  • Certificate of origin
  • ISF data
  • ISPM 15 certificate

This is a summary to help suppliers prepare. Exact requirements depend on the product and its intended use, and we confirm what applies during the documentation review.

Supplier FAQ

Common questions from manufacturers

Anything else, write to the trade desk at procurement@millholt.com.

Do you expect free samples?

No. Sample and courier costs are agreed before anything ships. We don't evaluate unsolicited bulk shipments.

Will you sign an NDA?

Yes. We sign a mutual NDA before you share formulations, drawings or pricing you consider confidential.

How long does an evaluation take?

Documentation review usually takes one to two weeks. Sample testing depends on the product: days for most hardware, longer for coatings that need cure and weathering tests.

Which Incoterms and payment terms do you work with?

FOB and EXW are most common, and we can also work with CIF, CFR or DDP. Payment is usually by T/T, with terms agreed per order. Letters of credit can be considered for larger orders.

Do you require exclusivity?

Not for standard products. Exclusivity is only discussed for private-label or co-developed products, and only alongside agreed volumes.

What order sizes do you handle?

Programs range from trial orders of a few cartons or a pallet to recurring container loads. Tell us your MOQ and we'll tell you whether it fits a current program.

Will you audit our factory?

For long-term programs, yes. Audits are done in person or through an independent inspection agency, and we share the findings with you.

Manufacturer & exporter portal

Submit your products for evaluation

We regularly benchmark new commercial products and material formulations for supply into North America. To send technical documentation, a company profile or a factory evaluation kit to our procurement office, use the supplier portal or write to the trade desk.

Attachments
Email spec sheets, SDS/COA files and catalogues to the trade desk, quoting your organization name.
Before you write
The compliance reference lists the documents we'll ask for in your product class.

Supplier portal

Submit once, track progress online

  • 01Company profile, products, certifications and commercial terms in one structured form.
  • 02Upload spec sheets, SDS, COA, certificates and catalogues, up to 5 files of 10 MB each.
  • 03Get a reference number straight away and check your submission's status at any time.